產品展示 / products

您的位置：網站首頁 > 產品展示 > 調音臺 > 雅馬哈調音臺 > 雅馬哈專業音響

雅馬哈專業音響

簡要描述：雅馬哈專業音響在擴音領域的歷*見證了許多重要的里程碑時刻。眾多革新的創造早已成為專業人士仰賴的重要*。現在，RIVAGE PM10 系統的問世，將開啟一個 PM 系列調音臺的全新時代。從聲音品質、操作性、功能性、可靠性、延展性等各方面而言，這一款精密的旗艦產品將定義新時代的發展方向。 RIVAGE PM10 繼承了PM系列的特性，

產品型號：
廠商性質：經銷商
更新時間：2025-05-09
訪問量：3607

產品咨詢聯系我們

產品分類

Product category

相關文章

詳細介紹

新一代雅馬哈PM數字混音系統。憑借其的操作性，功能性，可靠性，擴展性和超高音質，旗艦型號的 RIVAGE PM10 將成為未來數字混音系統的標準。

產品信息如有變動，恕不另行通知。上信息僅供參考，一切以具體實物為準。

Technical Specification of CL/QL

		CL5	CL3	CL1	QL5	QL1
Mixing Capacity	Input Mixing Channels	72 mono + 8 stereo	64 mono + 8 stereo	48 mono + 8 stereo	64 mono + 8 stereo	32 mono + 8 stereo
	Mix Buses	24			16
	Matrices	8 (Input to Matrix supported)			8 (Input to Matrix supported)
	Stereo Bus	1			1
	Mono	1			1
	Cue	1 (Second Cue Bus supported in CL V4.0 or later)			1 (Second Cue Bus supported in QL V4.0 or later)
Local Connectors	Analog Inputs	8			32	16
	Analog Outputs	8			16	8
	MY Slots	3			2
	Dante I/O	Primary / Secondary			Primary / Secondary
	Digital Out	1 (AES/EBU)			1 (AES/EBU)
	GPI	5 in / 5 out (CL V1.11 or later)			5 in / 5 out
	Word Clock I/O	Yes			Yes
	MIDI I/O	In / Out			In / Out
	External Redundant PSU	Optional PW800W			No
	Meter Bridge	Output meter built-in	Optional MBCL		No
	Ethernet	Yes			Yes
	AC Inlet	V-Lock Type			V-Lock Type
Scene Memory	Number of Scenes	300			300
	Recall Safe	Yes			Yes
	Focus Recall	Yes			Yes
	Fade Time	Yes (0s ~ 60s)			Yes (0s ~ 60s)
	Preview	Yes (CL V1.51 or later)			Yes
	Selective Load / Save	Yes (CL V1.7 or later)			Yes
	Tactile Control Keys	Yes			No (on-screen)
Input Channel Functions	Gain Compensation	Yes			Yes
	Digital Gain	Yes (-96dB ~ +24dB)			Yes (-96dB ~ +24dB)
	ATT	-96dB ~ 0dB			-96dB ~ 0dB
	HPF	20Hz ~ 600Hz, -6 or -12dB/oct Selectable (CL V1.51 or later)			20Hz ~ 600Hz, -6 or -12dB/oct Selectable
	PEQ	4 Band Full PEQ (RTA overlay support in CL V3.0 or later, New EQ Algorithms support in CL V4.0 or later)			4 Band Full PEQ (RTA overlay support in QL V3.0 or later, New EQ Algorithms support in QL V4.0 or later)
	Dynamics 1	Gate / Ducking / Compressor / Expander (Key-in Filter on the Compressor and Expander in CL V4.0 or later)			Gate / Ducking / Compressor / Expander (Key-in Filter on the Compressor and Expander in QL V4.0 or later)
	Dynamics 2	Compressor / Compander-H / Compander-S / De-esser			Compressor / Compander-H / Compander-S / De-esser
	Input Delay	Yes (0ms ~ 1000ms, frame delay support in CL V3.0 or later)			Yes (0ms ~ 1000ms, frame delay support in QL V3.0 or later)
	Pan	CENTER NOMINAL or LR NOMINAL for monaural input channels in CL V3.1 or later L-MONO, R-MONO or LR-MONO for stereo input channels in CL V3.1 or later			CENTER NOMINAL or LR NOMINAL for monaural input channels in QL V3.1 or later L-MONO, R-MONO or LR-MONO for stereo input channels in QL V3.1 or later
	DCA Group	16 (Output DCA and DCA Roll-Out support in CL V2.0 or later, Scrollable DCA Roll-Out support in CL V4.0 or later)			16 (Output DCA support in QL V3.0 or later)
	MUTE Group	8			8
	Number of Inserts	2 (CL V2.0 or later)			2
	Direct Out	Yes			Yes
Output Channel Functions	PEQ	4 Band Full PEQ (RTA overlay support in CL V3.0 or later, New EQ Algorithms support in CL V4.0 or later)			4 Band Full PEQ (RTA overlay support in QL V3.0 or later, New EQ Algorithms support in QL V4.0 or later)
	Dynamics 1	Compressor / Expander / Compander-H / Compander-S			Compressor / Expander / Compander-H / Compander-S
	MUTE Group	8			8
	Number of Inserts	2 (CL V2.0 or later)			2
Premium Rack	Number of Premium Racks	8			8
Premium Rack	Mountable Device	RND Portico5033 / RND Portico5043 / U76 / Opt-2A / EQ-1A / Dynamic EQ / Buss Comp 369 (CL V3.0 or later) / MBC4 (CL V4.0 or later)			RND Portico5033 / RND Portico5043 / U76 / Opt-2A / EQ-1A / Dynamic EQ / Buss Comp 369 (QL V3.0 or later) / MBC4 (QL V4.0 or later)
Effect Rack	Number of Effect Racks	8			8
	Number of Effect Programs	54			54
	Mountable Device	Effect / 31BandGEQ / Flex15GEQ / 8Band PEQ (CL V3.0 or later)			Effect / 31BandGEQ / Flex15GEQ / 8Band PEQ (QL V3.0 or later)
GEQ Rack	Number of GEQ Racks	16			8
GEQ Rack	Mountable Device	31BandGEQ / Flex15GEQ / Dugan Automixer (CL V3.0 or later) / 8Band PEQ (CL V3.0 or later) (RTA overlay support in CL V3.0 or later, GEQ gain control from the TOUCH AND TURN knob in CL V4.0 or later)			31BandGEQ / Flex15GEQ / Dugan Automixer / 8Band PEQ (CL V3.0 or later) (RTA overlay support in QL V3.0 or later, GEQ gain control from the TOUCH AND TURN knob in QL V4.0 or later)
Dante	Number of I/O Channels	64 in / 64 out			64 in / 64 out	32 in / 32 out
Dante	Dante Patch from Console	Yes			Yes
Recording	USB Memory Recording	Yes			Yes
Recording	DVS Recording	Yes (DVS and Nuendo Live bundled)			Yes (DVS and Nuendo Live bundled)
Broadcast Functions	5.1 Surround Panning	Yes (CL V3.0 or later)			Yes (QL V3.0 or later)
	Surround Monitor	Yes (CL V3.0 or later)			Yes (QL V3.0 or later)
	Mix Minus	Yes (CL V2.0 or later)			Yes (QL V3.0 or later)
	L-Mono / R-Mono / LR-Mono	Yes (CL V3.0 or later)			Yes (QL V3.0 or later)
Monitor	Solo Mode	Yes (CL V4.0 or later)			Yes (QL V4.0 or later)
	Second Cue Bus (allows the MATRIX 7/8 to be used as a CUE B bus)	Yes (CL V4.0 or later)			Yes (QL V4.0 or later)
	Oscillator	Sine Wave 1ch / Sine Wave 2ch (CL V3.0 or later) / Pink Noise / Burst Noise			Sine Wave 1ch / Sine Wave 2ch (QL V3.0 or later) / Pink Noise / Burst Noise
Other Functions	Port to Port	No			Yes
	RTA	Yes (CL V3.0 or later)			Yes (QL V3.0 or later)
	Output Port Delay	Yes (0ms ~ 1000ms, frame delay support in CL V3.0)			Yes (0ms ~ 1000ms, frame delay support in QL V3.0)
	Cascade	Yes (via MY slots)			Yes
	User Level	Yes			Yes
	Help File	Yes (CL V1.51 or later)			Yes
	Channel Link	Yes (Output Channel Link support in CL V3.0 or later)			Yes (Output Channel Link support in QL V3.0 or later)
	Channel Copy/Move	Yes			Yes
	Control & Monitoring for Digital Wireless Receivers	Shure ULXD4D/ULXD4Q (CL V4.0 or later)			Shure ULXD4D/ULXD4Q (QL V4.0 or later)
User Interface	Display	10 inch Touch Panel			10 inch Touch Panel
	Centralogic Section	Yes			No
	Faders	16 + 8 + 8 + 2	16 + 8 + 2	8 + 8+ 2	32 + 2	16 + 2
	Selected Channel Encoders	Gain, HPF, PEQ (controls for 4 bands), Dynamics 1/2(Threshold only), Pan, Mix/Matrix Sends			Gain, HPF, PEQ (controls for a selected band), Dynamics 1/2(Threshold only), Pan
	Channel Encoder	Yes (for Gain, Send Level, or an assigned parameter)			No
	Channel Name / Color Display	Yes			Yes
	Custom Fader Banks	Yes (customized for each fader section)			Yes (customized for all faders in a lump, MASTER fader of FADER BANK A in QL V4.0 or later)
	User Defined Keys	16 (x 4 banks in CL V3.0 or later)			12 (x 4 banks in QL V3.0 or later)
	User Defined Knobs	4			4 (on-screen)
	Touch and Turn Knob	Yes (using a User Defined Knob)			Yes
	Monitor Level Knob	Yes			Yes (on-screen)
	Wooden Arm Rest	Yes			No
	iPad Stay	Yes		No	Yes	No
	Rack-mounting	No			No	Yes
Software	Editor	CL Editor (Win/Mac, CSV files import/export in CL Editor V4.0.0 or later)			QL Editor (Win/Mac, CSV files import/export in QL Editor V4.0.0 or later)
	StageMix	CL StageMix (iPad app)			QL StageMix (iPad app)
	MonitorMix	Yes (CL V4.00 or later)			Yes (QL V4.00 or later)
	Console File Converter	Yes (Win/Mac)			Yes (Win/Mac)

CL5, CL3, CL1

*1 Crosstalk is measured with a 30dB/octave filter @22kHz
*2 Excluded MBCL optional meter bridge.
*3 Total Harmonic Distortion is measured with 18dB/octave filter @80kHz
*4 Hum & Noise are measured with A-Weight filter.

Analog Input Characteristics

Input Terminals	GAIN	Actual Load Impedance	For use with nominal	Input level			Connector
Input Terminals	GAIN	Actual Load Impedance	For use with nominal	Sensitivity^*1	Nominal	Max. before clip	Connector
OMNI IN 1-8	+66dB	10kΩ	50-600Ω Mics & 600Ω Lines	-82dBu (61.6μV)	-62dBu (0.616mV)	-42dBu (6.16mV)	XLR3-31 type (Balanced)^*2
	+18dB	10kΩ	50-600Ω Mics & 600Ω Lines	-34dBu (15.5mV)	-14dBu (155mV)	+6dBu (1.55V)
	+17dB	3kΩ	-33dBu (17.4mV)	-13dBu (174mV)	+7dBu (1.74V)
	-6dB	3kΩ	-10dBu (245mV)	+10dBu (2.45V)	+30dBu (24.5V)
TALKBACK	+64dB	10kΩ	50-600Ω Mics & 600Ω Lines	-70dBu (0.245mV)	-60dBu (0.775mV)	-40dBu (7.75mV)	XLR3-31 type(Balanced)^*2
TALKBACK	+20dB	10kΩ	50-600Ω Mics & 600Ω Lines	-26dBu (38.8mV)	-16dBu (0.123V)	+4dBu (1.23V)	XLR3-31 type(Balanced)^*2

*1. Sensitivity is the lowest level that will produce an output of +4dBu(1.23V) or the nominal output level when the unit is set to maximum gain.(all faders and level controls are maximum position.)
*2. XLR-3-31 type connectors are balanced..(1=GND, 2=HOT, 3=COLD)
*3. In these specifications, 0dBu = 0.775 Vrms.
*4. All input AD converters are 24bit linear, 128times oversampling.
*5. +48V DC ( phantom power ) is supplied to OMNI IN (1-8) and TALKBACK XLR type connectors via each individual software controlled switches.

Analog Output Characteristics

Output Terminals	Actual Source Impedance	For Use With Nominal	GAIN SW^*5	Output Level		Connector
Output Terminals	Actual Source Impedance	For Use With Nominal	GAIN SW^*5	Nominal	Max. before clip	Connector
OMNI OUT 1-8	75Ω	600Ω Lines	+24dB (default)	+4dBu (1.23 V)	+24dBu (12.3 V)	XLR-3-32 type(Balanced)^*1
OMNI OUT 1-8	75Ω	600Ω Lines	+18dB	-2dBu (616mV)	+18dBu (6.16V)	XLR-3-32 type(Balanced)^*1
PHONES	15Ω	8Ω Phones	-	75mW^*6	150mW	Stereo Phone Jack (TRS) (Unbalanced)^*2
PHONES	15Ω	40Ω Phones	-	65mW^*6	150mW	Stereo Phone Jack (TRS) (Unbalanced)^*2

*1. XLR-3-32 type connectors are balanced.( 1=GND, 2=HOT, 3=COLD )
*2. PHONES stereo phone jack is unbalanced.( Tip=LEFT, Ring=RIGHT, Sleeve=GND )
*3. In these specifications, 0dBu = 0.775 Vrms.
*4. All output DA converters are 24bit, 128times oversampling.
*5. There are switches inside the body to preset the maximum output level.
*6. The position of the level control is 10dB lowered from Max.

Digital Input & Output Characteristics

Terminal	Format	Data length	Level	Audio	Connector
Primary/Secondary	Dante	24bit or 32bit	1000Base-T	64ch Input/64ch Output @48kHz	etherCON Cat5e

Digital Output Characteristics

Terminal		Format	Data length	Level	Connector
DIGITAL OUT	AES/EBU	AES/EBU Professional Use	24bit	RS422	XLR-3-32 type (Balanced) ^*1

*1. XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)

I/O Slot (1-3) Characteristics

Control I/O Characteristics

Each I/O Slot accepts a Mini-YGDAI card. Only Slot1 has a serial interface.

Terminal		Format	Level	Connector
MIDI	IN	MIDI	-	DIN Connector 5P
MIDI	OUT	MIDI	-	DIN Connector 5P
WORD CLOCK	IN	-	TTL/75Ω　terminated	BNC Connector
WORD CLOCK	OUT	-	TTL/75Ω	BNC Connector
GPI (5IN/5OUT)		-	-	D-Sub Connector 15P (Female) ^*1
NETWORK		IEEE802.3	10BASE-T/100Base-TX/	RJ-45
LAMP (CL5=3, CL3=2, CL1=1)		-	0V - 12V	XLR-4-31 type ^*2
USB HOST		USB 2.0	-	USB A Connector (Female)
Meter Bridge (CL3/CL1 only)		-	-	D-Sub Connector 9P (Female)

產品咨詢

上一篇：EFX8聲藝調音臺

下一篇：U841A鐵三角話筒

雅馬哈專業音響

Technical Specification of CL/QL

CL5, CL3, CL1

Analog Input Characteristics

Analog Output Characteristics

Digital Input & Output Characteristics

Digital Output Characteristics

I/O Slot (1-3) Characteristics

Control I/O Characteristics

留言框

產品：

您的單位：

您的姓名：

聯系電話：

常用郵箱：

省份：

詳細地址：

補充說明：

驗證碼：

General specifications		CL5	CL3	CL1
General specifications
Sampling frequency rate	Internal	44.1kHz / 48kHz	44.1kHz / 48kHz	44.1kHz / 48kHz
Sampling frequency rate	External	44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm), 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm)	44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm), 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm)	44.1kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm), 48kHz: +4.1667%, +0.1%, -0.1%, -4.0% (±200ppm)
Signal delay		Less than 2.5ms, OMNI IN to OMNI OUT, Fs=48kHz	Less than 2.5ms, OMNI IN to OMNI OUT, Fs=48kHz	Less than 2.5ms, OMNI IN to OMNI OUT, Fs=48kHz
Total harmonic distortion		Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, OMNI IN to OMNI OUT, Input Gain = Min.	Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, OMNI IN to OMNI OUT, Input Gain = Min.	Less than 0.05% 20Hz-20kHz@+4dBu into 600Ω, OMNI IN to OMNI OUT, Input Gain = Min.
Frequency response		+0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, OMNI IN to OMNI OUT	+0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, OMNI IN to OMNI OUT	+0.5, -1.5dB 20Hz-20kHz, refer to +4dBu output @1kHz, OMNI IN to OMNI OUT
Dynamic range		112dB typ.: DA Converter / 108dB typ.: OMNI IN to OMNI OUT, Input Gain = Min.	112dB typ.: DA Converter / 108dB typ.: OMNI IN to OMNI OUT, Input Gain = Min.	112dB typ.: DA Converter / 108dB typ.: OMNI IN to OMNI OUT, Input Gain = Min.
Hum & noise level	Equivalent input noise	-128dBu typ., Equivalent Input Noise, Input Gain=Max.	-128dBu typ., Equivalent Input Noise, Input Gain=Max	-128dBu typ., Equivalent Input Noise, Input Gain=Max
Hum & noise level	Residual output noise	-88dBu, Residual output noise, ST master off	-88dBu, Residual output noise, ST master off	-88dBu, Residual output noise, ST master off
Crosstalk		-100dB*1, adjacent OMNI IN/OMNI OUT channels, Input Gain = Min.	-100dB*1, adjacent OMNI IN/OMNI OUT channels, Input Gain = Min.	-100dB*1, adjacent OMNI IN/OMNI OUT channels, Input Gain = Min.
Power requirements		US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz	US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz	US/Canada: 120V 60Hz, Japan: 100V 50/60Hz, China: 110-240V 50/60Hz, Korea: 220V 60Hz, Other: 110-240V 50/60Hz
Power consumption		170W: Internal Power Supply / 200W: Simultaneous use of Internal PSU and External PW800W	170W: Internal Power Supply / 200W: Simultaneous use of Internal PSU and External PW800W	170W: Internal Power Supply / 200W: Simultaneous use of Internal PSU and External PW800W
Dimensions	W	1053mm (41 1/2in)	839mm (33 1/8in)	648mm (25 5/8in)
	H	299mm (11 3/4in)	299mm (11 3/4in)	299mm (11 3/4in)
	D	667mm (26 1/4in)	667mm (26 1/4in)	667mm (26 1/4in)
Net weight		36kg (79.4lb)	29kg (63.9lb)	24kg (52.9lb)
Others		Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃	Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃	Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃